Setup, Compatibility & Care
Surface Preparation: Ensure surfaces to be painted are clean, dry, and free from dust, grease, and flaking paint. For bare wood or metal, apply one coat of Rustins Quick Drying Primer Undercoat or an appropriate metal primer. If painting over existing gloss paint, a light sanding may be required.
Application: Stir the paint thoroughly before use. Apply using a good quality brush. Two thin coats are generally recommended for best results. Allow approximately 30 minutes for the paint to become touch dry. Ensure adequate ventilation during application and drying.
Compatibility: This paint is designed for application on wood and metal. It is intended to be used over Rustins Quick Drying Primer Undercoat or existing paints and varnishes that are in good condition.
Care: Clean brushes and equipment immediately after use with water. For the painted surface, clean with a damp cloth. Avoid abrasive cleaners. The finish is resistant to oil and water once fully cured.