Farrow & Ball Vardo No. 288 - Blue

Vardo No. 288 is ideal for exterior masonry, brickwork, and exposed interior stone or brick. It is also suitable for garden walls, flower pots, and other outdoor decorative items.

While Vardo has a protective finish, Farrow & Ball typically recommends their Modern Emulsion or Estate Emulsion for interior walls, and specific finishes like Estate Eggshell or Modern Eggshell for woodwork and higher-traffic interior areas. Vardo's primary formulation is for exterior masonry.

Generally, two coats are recommended for best colour depth and durability. Always follow the specific instructions provided on the product packaging.

Vardo is a water-based paint and dries relatively quickly. It is typically touch-dry within 2-3 hours, with recoating recommended after 4 hours, depending on conditions.

No, Farrow & Ball water-based paints, including Vardo, have minimal odour, making them more pleasant to use compared to traditional solvent-based paints.

Painted surfaces can be gently cleaned with a soft cloth dampened with water and a mild detergent if necessary. Avoid using abrasive cleaners or scouring pads.

Exterior Eggshell is specifically formulated for masonry and exterior wood, offering a more durable, weather-resistant finish with a low sheen. Other Vardo finishes might be interior-focused or have different sheen levels.

Ensure thorough mixing of the paint before and during use. Apply paint with consistent, even strokes. Check that the correct number of coats have been applied and allow sufficient drying time between coats.

This often indicates inadequate surface preparation or moisture issues. Ensure the surface was clean, dry, and properly primed. For exterior use, check for underlying dampness in the masonry.

The surface may not have been adequately prepared. Ensure it was clean, dry, and free from contaminants. A primer might be necessary for certain surfaces, especially bare masonry or previously glossy finishes.

Lighting conditions significantly affect colour perception. Always test a small area or use a tester pot in the intended location to see how the colour appears in different lights. Colour can also vary slightly between batches.