Rust-Oleum Floor Wood & Concrete Paint, Chalky Finish - Black
Cover new ground by adding a classic low sheen chalk finish to your flooring for a contemporary re...Cover new ground by adding a classic low sheen chalk finish to your flooring for a contemporary refresh. This hard wearing, wood and concrete floor paint is water based and designed to resist knocks and scratches. The extremely durable, smooth matt finish can be applied directly over previously painted and varnished surfaces. Can be applied to wooden floorboards or concrete flooring. Dries quickly and is touch dry in 1 hour. Extremely durable smooth matt finish. Exceptional coverage, no need for several coats. Covers up to 14 square meters per litre. High pigment and water based. Not recommended for outdoor use or areas subject to regular water contact, e.g. bathrooms or areas subject to heavy water such as garage floors. Not recommended for tiles or laminate flooring.
Rust-Oleum Black Scratch-Resistant Floor Paint In Matt Finish - Natural Charcoal (Black) 2.5LFree delivery in 1–3 days£60.77Visit shop →
Product Information
Full details
This guide is for anyone looking to refresh their wooden or concrete floors with a durable, chalky finish using Rust-Oleum Floor Paint. The paint offers an easy-to-apply, water-based solution that resists scratches and provides excellent coverage. However, it's important to note that this paint is not recommended for outdoor use, areas with heavy water contact (like bathrooms or garages), or on tiles and laminate flooring.
All features
Colour
Black
Brand
Rust-Oleum
Extended Product Information
FAQs
Can I use this paint outdoors?
No, this paint is not recommended for outdoor use.
Can I use this paint in a bathroom?
No, this paint is not recommended for areas subject to heavy water contact, such as bathrooms.
How many coats of paint are needed?
For optimal results, two coats are recommended.
How long does it take for the paint to dry?
It is touch dry in 1 hour. Allow for complete drying (typically 4-6 hours) before light use, and full cure in 7 days.
What surfaces can I apply this paint to?
The paint is suitable for wooden floorboards and concrete flooring. It is not suitable for tiles or laminate flooring.
How do I clean the painted surface?
Clean the floor with a damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals.
What is the coverage of the paint?
The paint covers up to 14 square meters per liter.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean, dry, and properly prepared. Lightly sand glossy surfaces to improve adhesion.
Paint is not covering the surface evenly.
Ensure you are applying the paint evenly and allow for adequate drying time between coats. Two coats are recommended for optimal coverage.
The finish is not as expected.
Make sure you are using the correct application method. Stir the paint thoroughly before use. Make sure the surface is not exposed to moisture before it has fully cured.
Pros and Cons
Pros
Durable and scratch-resistant finish
Easy to apply with excellent coverage
Quick drying time
Water-based formula
Suitable for various surfaces
Offers a stylish chalky finish
Cons
Not suitable for outdoor use
Not recommended for areas with heavy water contact (e.g., bathrooms)
Not compatible with tiles or laminate flooring
Limited to specific surfaces
May require multiple coats for optimal results on heavily worn surfaces
Specific colour selection is limited
Setup, Compatibility & Care
Surface Preparation: Ensure the floor is clean, dry, and free from loose debris. Lightly sand glossy surfaces to improve adhesion.
Application: Stir the paint thoroughly before use. Apply using a brush or roller, following the manufacturer's instructions. Two coats may be needed for optimal results.
Drying Time: The paint is touch dry in 1 hour. Allow for complete drying (typically 4-6 hours) before light use, and full cure in 7 days.
Compatibility: This paint is compatible with wood and concrete. It is not compatible with tiles or laminate flooring. Not suitable for areas subject to regular water contact.
Care: Clean the floor with a damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals.