The Aico Ei168RC Easi-fit RadioLINK Base is a mains-powered unit with a built-in tamperproof recha...The Aico Ei168RC Easi-fit RadioLINK Base is a mains-powered unit with a built-in tamperproof rechargeable lithium back-up battery. It enables wireless RadioLINK interconnection between alarms, allowing all alarms in the system to sound when one is triggered. This base is compatible with Aico 140 and 160RC series alarms, and up to 20 units can be fitted on one system. The built-in RadioLINK provides wireless interconnection between alarms. It is mains powered with a rechargeable lithium cell back-up.
This guide is for homeowners and professionals seeking to understand and utilize the Aico Ei168RC RadioLINK Base. It provides a wireless interconnection solution for Aico alarms, enhancing safety by ensuring all alarms activate when one is triggered. A key consideration is the need for compatible Aico 140 and 160RC series alarms for proper functionality.
All features
Model Part Number
Ei168Rc
Brand
Aico
Extended Product Information
FAQs
What is RadioLINK?
RadioLINK is Aico's wireless interconnection technology, which allows alarms to communicate with each other without the need for wires.
How many alarms can be connected to one system?
Up to 20 Aico units can be interconnected using the Ei168RC RadioLINK Base.
What happens during a power outage?
The built-in rechargeable lithium battery provides backup power, ensuring the alarms continue to operate.
How do I test the alarm system?
Press the test button on any of the Aico alarms to check if all interconnected units respond.
Can I use this base with any Aico alarm?
No, it is only compatible with Aico 140 and 160RC series alarms.
How often should I test my alarms?
It is recommended to test your alarms at least once a month.
How long does the backup battery last?
The backup battery is designed to provide sufficient power during a power outage. The exact duration depends on usage and environmental factors.
How do I replace the battery?
The battery is tamperproof and not user-replaceable; contact a qualified professional if needed.
Troubleshooting
Alarms are not interconnecting.
Check that all alarms are compatible Aico 140 or 160RC series units. Ensure all units are within the RadioLINK range, and check for any interference.
Alarm sounds but no other alarms activate.
Check the RadioLINK base connection and ensure all alarms are correctly paired to the base.
Alarm is beeping or showing an error.
Check the alarm unit’s manual for specific error codes and troubleshooting steps. Low battery can be indicated by the alarm itself. Make sure all the units are securely installed in their bases.
Pros and Cons
Pros
Provides a wireless interconnection solution, eliminating the need for hard wiring.
Ensures all alarms activate when one is triggered, enhancing safety.
Offers a backup battery for continued protection during power outages.
Easy installation with a simple 'Easi-fit' design.
Cons
Requires compatibility with specific Aico alarm models (140 and 160RC series).
Limited to a maximum of 20 interconnected units.
Relies on RadioLINK technology, which may be susceptible to interference in some environments.
Setup, Compatibility & Care
Installation:
Ensure the mains power is switched off before installation.
Replace the existing alarm base with the Ei168RC base, following the manufacturer's instructions.
Connect the mains power supply.
Insert an Aico 140 or 160RC series alarm unit onto the base.
Compatibility:
This base is only compatible with Aico 140 and 160RC series alarms.
Verify compatibility before purchase and installation.
Care:
Regularly test the alarms by pressing the test button on the alarm unit.
Clean the alarm units with a soft, dry cloth. Do not use cleaning agents or solvents.
Ensure the vents on the alarm unit are not blocked.
The backup battery is rechargeable and tamperproof; no maintenance is required, but it’s still important to test the unit regularly.