Lian Li Lancool 217 Infinity Mid Tower Gaming PC Case - Black - LAN217INFX

The Lancool 217 comes with five pre-installed fans: two 120mm at the front, one 140mm at the rear, and two 120mm at the bottom.

The case supports graphics cards up to 380mm in length.

Yes, the Lancool 217 supports top radiator sizes of up to 360mm.

It supports ATX, EATX, SSI EEB, Micro-ATX, and Mini-ITX motherboards. Back-connect motherboards (ATX, Micro-ATX) are also supported.

The magnetic dust filters at the front and bottom can be removed by gently pulling them off. Clean them by tapping off dust or washing with mild soap and water, ensuring they are fully dry before reattaching.

No, the power supply is not included with the case. You will need to purchase a compatible ATX or compact PSU separately.

The wood accents should be cleaned with a dry or slightly damp soft cloth. Avoid abrasive cleaners or excessive moisture.

Ensure the PSU is correctly connected to the wall outlet and the power switch on the PSU is in the 'On' position. Verify that the case's front panel power switch is correctly connected to the motherboard headers.

Check that all fans are spinning in the correct direction for optimal airflow (intake at front/bottom, exhaust at rear/top). Ensure no cables are obstructing fan blades. Clean dust filters if they appear clogged. Verify fan mounting and placement for CPU/GPU cooling.

Confirm the installed motherboard form factor (ATX, EATX, SSI EEB, etc.) is supported by the case. Refer to the 'Motherboard Compatibility' section for specific dimensions and back-connect support.

Ensure the graphics card length does not exceed the 380mm maximum supported length. If installing vertically, confirm sufficient clearance and that the PCIe slot bracket is correctly positioned.

Experiment with the dual PSU mounting options (standard vs. rotated) to find the best configuration for your PSU size and cable management. Removing the PSU shroud cover can also provide additional space.