Toupret Metal Corner Tape - 30m

No, this metal corner tape is specifically designed for internal corners only. For external corners, you would typically use corner beads or angle beads.

Most standard jointing compounds and plasters are suitable. Ensure the compound is applied generously enough to fully embed the tape.

Apply multiple thin coats of jointing compound, feathering the edges widely. Allow each coat to dry completely and sand lightly if needed before the next application.

The tape is 51mm wide, providing good coverage for reinforcing plasterboard corners.

The roll contains 30 meters of metal corner tape.

Yes, the tape can be easily cut to the desired length using sharp scissors or a utility knife.

The metal strips are designed for interior use and are coated to resist corrosion. Proper storage in a dry environment is recommended.

Ensure the corner is clean and free of dust. Apply a more generous and even coat of jointing compound before embedding the tape. Press firmly and smooth out excess compound thoroughly.

This may indicate insufficient compound coverage or a weak first coat. Ensure the tape is fully embedded and subsequent coats are applied evenly, feathering out to a wider area.

Use the central crease as a guide and ensure the tape is aligned precisely with the angle of the corner. Apply firm, even pressure when smoothing to maintain the straightness.

Apply additional, thinner coats of jointing compound, feathering the edges further. Ensure each coat is fully dry before applying the next, sanding lightly if necessary between coats.