Toupret Rock Solid Repair Filler - White

Drying time depends on the depth of the fill and environmental conditions. Generally, it can be overcoated in 24 hours.

Yes, it can be used on all substrates, including wood.

You can use any standard water-based masonry paint or mineral paint. For polyurethane or epoxy solvent-based paints, prime with a water-based exterior paint first.

Yes, it is suitable for both interior and exterior use.

No, priming is not typically required. However, the surface should be clean, dry, and free from loose particles. If using solvent-based paints, priming with a water-based exterior paint is recommended.

Store in a cool, dry place. Ensure the container is tightly sealed when not in use.

For deep repairs, it's best to apply the filler in thin layers, allowing each layer to dry completely before applying the next.

Ensure the surface is clean, dry, and free from any contaminants. Lightly sand the surface to improve adhesion.

Apply the filler in thin layers, allowing each layer to dry completely before applying the next. Avoid applying too much filler at once.

Use fine-grit sandpaper and ensure the filler is completely dry before sanding. Use a sanding block for even results.

Ensure the filler is completely dry. If using solvent-based paints, prime the filled area with a water-based exterior paint before applying the topcoat.