SmartSeal Porcelain Tile Sealer - 3 Pack - 1L

Coverage is up to 10-20m² per litre, but this can vary depending on the surface texture and porosity of the tile.

This sealer is specifically designed for porcelain and ceramic tiles. Using it on other types of tiles is not recommended.

The drying time is dependent on environmental conditions. Please refer to the product label for specific drying times.

Use a pH-neutral cleaner and a soft cloth or mop for regular cleaning. Avoid abrasive cleaners.

This product is a single-coat application. Reapplication is not necessary.

Yes, it is suitable for both internal and external porcelain and ceramic tiles, but avoid application if rain is forecast within 8 hours when using externally.

If rain occurs within 8 hours of external application, the sealing process may be compromised, and reapplication may be necessary after the surface has thoroughly dried.

This sealer can be used on porcelain and ceramic tiles on patios, walls, and floors, both inside and outside the home.

Ensure an even coat is applied. Use a clean applicator and avoid over-application. Reapply if necessary after the first coat has dried.

This may indicate insufficient sealer has been applied or the surface was not properly cleaned before application. Reapply the sealer, following the instructions carefully.

This could be due to residue from the application. Try buffing the surface with a clean, dry microfibre cloth after the sealer has completely dried.