Fossil Neutra Chrono Watch - ES5216

Gently pull the crown out to the appropriate position. Rotate it to adjust the time or date, then push the crown back in completely to ensure water resistance.

Yes, it is water resistant up to 50 meters, meaning it is suitable for recreational swimming in shallow water. However, it is not recommended for diving, snorkeling, or high-impact water sports. Always ensure the crown is fully pushed in before contact with water.

Yes, the stainless steel bracelet can be adjusted to fit your wrist. It is highly recommended to have this done by a professional jeweler or watch technician to ensure it's done correctly without damaging the links or pins.

Info needed: [Specific battery type for Fossil ES5216 quartz chronograph movement. Typically a standard watch button cell battery (e.g., SR621SW, SR920SW, etc.)]

Use a soft, damp cloth to wipe down the case and bracelet. For stubborn dirt, a very mild soap solution can be applied with the cloth, followed by thorough rinsing with clean water and drying. Avoid abrasive cleaners or harsh chemicals.

A chronograph is a type of watch that functions as both a display watch and a stopwatch. It allows you to measure elapsed time independently of the main time display using its sub-dials and pushers.

Check if the crown is pushed in completely. If the watch is still not functioning, the quartz movement relies on a battery that may need replacement. Contact a qualified watch technician for battery replacement.

Most quartz chronographs have a reset procedure. For some models, pulling the crown to the second position and then pressing the chronograph pushers (usually the top or bottom, or both simultaneously) will allow you to adjust the hands back to zero. Refer to your watch's specific manual if available. If unsuccessful, a professional can re-calibrate the hands.

This indicates a potential breach in the watch's water resistance. It's crucial to have the watch inspected by a professional watchmaker as soon as possible to prevent further damage to the internal components. Avoid placing it near heat sources to 'dry' it out, as this can worsen the issue.