Oval Bulkhead Light - Weathered Brass

Yes, the Oval Bulkhead Light has an IP54 rating, making it suitable for bathroom use in zones 2 and 3 (away from direct water spray).

It uses an E27 screw bulb. A maximum of 60W is recommended, but an LED equivalent is advised for energy efficiency and to minimize heat.

Clean with a soft, dry cloth. A slightly damp cloth can be used for marks, but dry immediately. Avoid abrasive cleaners.

Yes, its IP54 rating makes it suitable for exterior use, providing protection against dust and water splashes.

While the design is simple, electrical installation should be performed by a qualified electrician to ensure safety and compliance.

This model is available in three sizes. Please refer to the product specifications for the exact dimensions of the specific size you are interested in.

No, the weathered brass finish is designed to have a natural, aged appearance and does not require sealing. Regular dusting with a soft cloth is sufficient for maintenance.

Ensure the power supply is switched on at the breaker. Check that the bulb is correctly screwed in and not burnt out. Verify all electrical connections made during installation are secure and correct.

This could indicate a loose bulb or a faulty bulb. Try tightening the bulb or replacing it with a new one. If the issue persists, check the wiring connections.

The weathered brass finish has a natural patina. If you desire a more uniform look, gently clean with a soft dry cloth. For significant unwanted tarnishing, a specific brass cleaner *might* be used cautiously, but always test on an inconspicuous area first and avoid abrasive materials.

Ensure all seals and the cable gland are correctly fitted and tightened. If the fixture is damaged, it may need replacement. For minor condensation, allow the fixture to dry out with the bulb removed, and ensure adequate ventilation if possible.