Snowdon Timber Treated Tongue And Groove Shiplap Cladding - 12mm - 120mm - 3.0m

While technically possible, these boards are specifically pressure-treated for outdoor use and may have a distinct odor or chemical residue not ideal for interior living spaces.

Yes, once the boards have dried out sufficiently after installation, apply a high-quality exterior primer followed by outdoor wood paint.

Each board covers approximately 0.36 square meters.

No, they should always be fixed to a timber batten framework to allow for airflow and prevent moisture buildup between the cladding and the masonry.

You will need a circular saw or hand saw, a drill, a spirit level, measuring tape, and galvanized nails or screws.

While the treatment is designed for long-term decay resistance, environmental factors vary, so it is recommended to maintain the boards with a sealant annually.

Check the groove for debris or wood shavings and ensure the board is perfectly level before applying pressure.

This is a normal characteristic of the pressure treatment process; allow the boards to air out in a dry, ventilated area before installation.

Ensure the boards were allowed to acclimatize to the outdoor environment for 24-48 hours before fitting to account for natural expansion and contraction.