Best current price£36.96from B&Q
Shopping.co.uk recommended and popular offers
B&Q£36.96Visit shop B&Q - Valtti Opaque Exterior Wood PaintWeatherproof Semi Matt For FencesShedsCladding & Doors 1L Granite K499
Visit shop4 offers from £36.96 - £306.11
View price history by clicking the chart icon.
The TIKKURILA Valtti Opaque Exterior Wood Paint is designed for homeowners and professionals seeking long-lasting, durable protection for exterior wood surfaces. Its key benefit is superior weather resistance, offering up to 15 years of protection when used with Tikkurila Ultra Primer. A potential caveat is that optimal results and longevity depend on proper surface preparation and system application.
| Colour | Grey |
|---|---|
| Brand | Tikkurila |
When used as part of a full system with Tikkurila Ultra Primer, Valtti Opaque can protect exterior wood surfaces for up to 15 years.
Valtti Opaque is designed for vertical surfaces like cladding, fences, and doors. For decking, a specialized decking treatment is recommended.
For best results, bare or weathered wood should be primed with Tikkurila Ultra Primer. Ensure the surface is clean, dry, and free from contaminants.
It is suitable for most exterior wood types used in cladding, facades, fences, doors, and sheds. Always check specific wood compatibility if unsure.
Yes, if the existing paint is sound. However, it's crucial to clean the surface thoroughly and ensure good adhesion. For best results, consider priming over older finishes.
Typically, 1-2 coats are recommended. Ensure adequate drying time between coats as per product instructions.
Valtti Opaque is a water-based, low-VOC formula, meaning it has lower volatile organic compound emissions compared to many solvent-based alternatives.
Ensure the surface was properly prepared and primed with Tikkurila Ultra Primer. Check that the wood was dry before application and that the paint was applied under suitable weather conditions.
Stir the paint thoroughly before and during application. Ensure consistent application technique across the surface. Check if multiple tins of different batches were mixed together without adequate blending.
Check ambient temperature and humidity. If conditions are too cold or humid, drying times will be extended. Ensure adequate ventilation.
This can occur if the surface was not adequately protected by a primer or if exposed to extreme UV radiation without sufficient topcoats. Ensure the full system (primer + topcoats) was applied correctly.
Preparation is key for optimal performance. For bare or weathered wood, it is essential to prime the surface with Tikkurila Ultra Primer before applying Valtti Opaque. Ensure the wood surface is clean, dry, and free from dirt, dust, and grease. Remove any old, flaking paint.
Compatibility: This paint is designed for exterior wood surfaces, including timber cladding, wood facades, fences, doors, and sheds. It is not intended for use on plastics or metal.
Application: Apply 1-2 coats of Valtti Opaque using a brush or sprayer. Stir the paint well before and during application. Allow adequate drying time between coats as recommended on the product label. For best results, avoid applying in direct sunlight, extreme temperatures, or when rain is expected.
Care: Clean tools immediately after use with water. To maintain the finish, gently clean the painted surface with a soft brush or cloth and mild detergent if necessary. Avoid abrasive cleaners.
