Dryzone Anti Mould Paint - Beige

Use a damp cloth and mild detergent to clean the painted surface. Avoid using abrasive cleaners.

Priming is generally not required, but ensure the surface is properly prepared.

The paint is suitable for areas with high humidity, but direct contact with water from showers might require additional care and maintenance.

Drying times can vary, but generally allow 2-4 hours between coats. Check the paint can for specific instructions.

This paint has a soft sheen finish.

The paint covers approximately 50m² - 60m².

It is ideal for areas prone to condensation like bathrooms, kitchens, and bedrooms.

Ensure the underlying cause of moisture is addressed (e.g., improve ventilation, fix leaks). Thoroughly clean and treat the area with a mould-killing solution before repainting.

Ensure the paint is well-stirred. Apply two coats for better coverage. Make sure the application is even.

Ensure adequate ventilation during and after painting. The paint is low odour but ventilation is still recommended.