Dynaplug Racer Pro Tubeless Repair Tool - Silver

The Racer Pro comes with four preloaded plugs. Once all four are used, you can purchase replacement plugs to refill the tool.

The standard soft nose plug is for typical punctures, while the Megaplug is larger and designed for more severe tire damage.

The Dynaplug system works best with tubeless tire sealant, as the sealant helps to further seal the area around the plug and maintain pressure.

Yes, the Dynaplug Racer Pro is designed for both tubeless-converted tires and true tubeless-ready tires.

No, the Dynaplug features a non-abrasive tip designed specifically to prevent damage to your rims and rim tape.

Dynaplug repairs are designed to be permanent. The viscoelastic material bonds with the tire, providing a long-lasting seal.

The Dynaplug Racer Pro is very lightweight and compact, designed for minimal impact on your cycling gear's weight.

Ensure the plug was inserted completely and the tool was extracted correctly. Check if the puncture is too large for the selected plug. Try using the Megaplug for larger holes or re-center the plug if it seems off-axis.

Ensure the puncture area is clean. A slight wiggle can help with insertion. For removal, pull straight and firmly. Do not force the tool if significant resistance is met, as this might indicate improper alignment.

Purchase replacement plug kits from Dynaplug or authorized retailers. Store the tool carefully in its intended compartment or a small, secure pouch.

Over time, plugs can dry out. It's recommended to replace plugs that show signs of drying or cracking. Replacements are readily available.