Diall M8 Hex Bolt Steel Shield Anchor - Silver

The specific weight capacity depends on the substrate material (e.g., concrete strength) and proper installation. Always consult the product's technical data sheet or manufacturer specifications for load ratings relevant to your application.

Yes, the zinc-plated finish offers good resistance to corrosion, making them suitable for many outdoor applications. However, prolonged exposure to harsh weather or saltwater environments may reduce their lifespan.

Typically, an M8 shield anchor requires a drill bit between 12mm and 14mm. It is crucial to check the specific recommendations provided by Diall for this anchor model to ensure a proper fit and secure installation.

These anchors are designed for solid materials. They can be used in solid brick walls but are not suitable for hollow bricks or walls with cavities.

The thread length of the M8 hex bolt is 80mm.

Yes, the included washer and nut are essential for the proper installation and function of the shield anchor. The nut tightens the bolt, causing the shield to expand and grip the surrounding material.

Shield anchors are designed for permanent fixings. While it might be possible to remove the bolt, the expanded shield remains in the material, and the anchor is generally not suitable for re-installation.

Ensure the hole was drilled to the correct diameter and depth for the anchor. Verify the material is solid concrete or dense masonry. Check for debris in the hole. Ensure the nut was tightened sufficiently to expand the shield.

Confirm the correct drill bit size was used. Re-clean the hole to remove any obstructions. If the hole is too small, it may need to be re-drilled slightly larger.

This is cosmetic and may occur with prolonged exposure to moisture. If structural integrity is not compromised, it may still function. For critical applications, consider anchors with higher corrosion resistance or protective coatings.