Polyvine - Wood Dye Colour - Green - 500Ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Polyvine Wood Dye in vibrant green is for DIY enthusiasts and woodworkers seeking a smooth, even color finish on their projects. Its key benefit is the water-based, low-odour formula that prevents overlap marks for professional results. A potential caveat is that as a dye, it penetrates the wood rather than forming a surface film, so preparation is key for consistent application.
All features
| Colour | Green |
|---|---|
| Model Part Number | WCG4 |
| Brand | Polyvine |
Extended Product Information
FAQs
Can I use this dye on pre-finished or painted wood?
No, this dye is designed for bare wood. Pre-finished or painted surfaces must be completely stripped and sanded back to bare wood for the dye to penetrate and color effectively.
How long does the dye take to dry?
Drying time can vary depending on temperature, humidity, and application thickness. Generally, it is touch-dry within an hour, but allow at least 4-6 hours for complete drying before applying a topcoat.
Do I need to seal the wood after applying the dye?
Yes, it is highly recommended to apply a protective topcoat such as varnish, lacquer, or oil after the wood dye has dried to protect the color and the wood itself.
What is the coverage rate?
Coverage can vary significantly based on the porosity and condition of the wood. A general guideline is approximately 10-12 square meters per liter, but testing on your specific wood is advised.
Can I mix this green dye with other colors?
Yes, Polyvine Wood Dyes can be mixed together to create custom shades. Always mix a small test batch first to achieve your desired color.
Is this dye suitable for exterior use?
This product is primarily designed for interior use. For exterior applications, specific exterior wood treatments and finishes are recommended.
Troubleshooting
Uneven color application or streaks.
Ensure the wood surface is properly prepared and free from dust. Apply the dye in thin, even coats, working with the grain. Avoid excessive brushing or wiping in one spot.
Color not as expected.
Test the dye on a scrap piece of the same wood type first. The final color can vary depending on the wood species and its natural tone.
Dye is too thick or difficult to apply.
Ensure the dye is thoroughly stirred. If still too thick, a very small amount of water may be added, but do this sparingly as it can dilute the color intensity.
Pros and Cons
Pros
- Achieve a smooth, uniform color application.
- Low odor makes it suitable for indoor use.
- Water-based for simple cleanup.
- Prevents unsightly overlap marks.
- Enhances natural wood grain with vibrant color.
Cons
- Requires proper wood preparation for best results.
- As a dye, it will alter the wood's appearance permanently.
- May not offer protective qualities on its own; a topcoat is usually needed.
Setup, Compatibility & Care
Setup:
- Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes. Lightly sand if necessary and wipe clean.
- Stir the dye thoroughly before and during use.
- Apply using a brush, cloth, or sponge, working with the wood grain.
Compatibility:
- Suitable for use on most bare wood surfaces.
- For durability and protection, a clear topcoat (e.g., varnish, lacquer, or oil) is recommended after the dye has dried.
Care:
- Store in a cool, dry place away from direct sunlight.
- Keep the container tightly closed when not in use.
- Clean application tools immediately after use with soap and water.