Shopping.co.uk

Mipa 1K Epoxy Primer Spray - Grey

Mipa 1K Epoxy Primer Spray - Grey

This high performance primer combines strong adhesion with effective corrosion protection, making ...

Best current price£13.95from eBay

Colour
BlackGrey

Best offers

Shopping.co.uk recommended and popular offers

All Offers

3 offers from £13.95 - £19.99

View price history by clicking the chart icon.

eBay1 x MIPA 1K Epoxy Primer Aerosol Anti-Corrosion Fast Dry 400ml
Free delivery in 1–3 days
£13.95
Visit shop
B&QB&Q - 1K Epoxy Primer Spray Light Grey 400Ml
Free delivery in 1–3 days
£19.99
Visit shop

Product Information

Full details

The Mipa 1K Epoxy Primer Spray is designed for professional refinishers and DIY enthusiasts who need a reliable, high-performance base for automotive and metal projects. Its primary benefit is the combination of excellent corrosion protection and strong adhesion on difficult surfaces like aluminum and zinc, though users should note it is a one-component system that requires careful application to achieve its best insulating effects.

All features

ColourGrey
Model Part Number213250001
BrandMipa

Extended Product Information

FAQs

Is this primer suitable for bare steel?

Yes, it provides excellent anti-corrosion protection for bare steel and iron surfaces.

Can I apply this over plastic bumpers?

No, this is an epoxy primer designed for metal surfaces. Plastic parts require a dedicated plastic adhesion promoter.

Do I need to sand the primer before painting?

While it can be applied as a wet-on-wet system in some cases, for the best finish, light sanding with P800-P1000 is recommended.

Is this a 2K product?

No, this is a 1K (one-component) product, meaning it does not require an external hardener to cure.

Can I use this under a clear coat directly?

It is intended to be used as a base for color paint, not as a standalone finish or a clear coat substitute.

Troubleshooting

Nozzle clogging during application

Invert the can and spray until clear or soak the nozzle in thinners if blockage persists.

Poor adhesion to the surface

Ensure the substrate was adequately sanded and degreased with a solvent-based cleaner prior to application.

Surface appears rough after spraying

Increase the distance from the target surface slightly and ensure consistent spray stroke speed.

Pros and Cons

Pros

  • Excellent adhesion on aluminum and zinc
  • High filling capacity hides minor surface scratches
  • Fast drying time improves project efficiency
  • Effective insulation against humidity

Cons

  • Requires proper ventilation due to aerosol propellants
  • Not suitable for use directly over bare plastic without a plastic adhesion promoter
  • Single-component chemistry has lower chemical resistance than two-component epoxy systems

Setup, Compatibility & Care

  1. Surface Prep: Ensure the surface is clean, dry, and free from grease or wax. Degrease using a silicone remover.
  2. Sanding: Scuff the surface with P400-P600 grit sandpaper to ensure mechanical adhesion.
  3. Application: Shake the can vigorously for at least two minutes. Apply in 2-3 thin, even coats, allowing flash-off time between layers.
  4. Compatibility: This primer is compatible with most standard 1K and 2K topcoats. Always perform a test spray on a scrap panel if you are unsure of the compatibility with your specific brand of paint.
  5. Maintenance: After use, invert the can and spray for a few seconds to clear the nozzle. Store in a cool, dry place away from direct sunlight.

Price History

DatePrice
Visit shop