Draper Storm Force Air Stapler/Nailer - 14609

The Draper Storm Force Air Stapler/Nailer requires an air compressor that can supply air at 75-100psi.

The tool is compatible with nails ranging from 10-50mm and staples from 12-40mm.

Refer to the product manual for detailed instructions on loading staples and nails into the magazine.

Lubricate the tool regularly as specified in the product manual. This typically involves applying oil to the appropriate points before each use or as needed.

Always wear safety glasses when operating the tool. Never point the tool at yourself or others. Ensure the safety mechanism is engaged when not in use.

Clean the tool regularly by removing any debris and dust. Use a clean cloth to wipe down the exterior. Avoid using solvents or harsh chemicals.

The Draper Storm Force Air Stapler/Nailer weighs 1.45kg.

Contact Draper or an authorized dealer for replacement parts.

Check the air compressor, air hose connections, and that the tool is loaded with the correct staples or nails. Verify the safety mechanism is fully engaged.

Increase the air pressure from the compressor within the recommended range. Ensure you're using the correct length of staples/nails for the material.

Check all connections for leaks. Inspect the tool for any damage, and refer to the manual for maintenance and repair instructions.