Stuart Turner Showermate TP Twin Shower Pump 1.5 bar

Positive head shower pump. Suitable for gravity fed systems. Anti-vibration couplers G 3/4 threade...

Best current price£133.87from B&Q

All Offers

6 offers from £133.87 - £232.18

View price history by clicking the chart icon.

B&QB&Q - 1.5 Bar Twin Impeller Shower Pump Techflow St + Pair Hoses
Free delivery in 1–3 days
£133.87
Visit shop
AmazonStuart Turner Black - Showermate Tp Standard 1.5 Bar Twin
Free delivery in 1–3 days
£135.99
Visit shop
OnBuy.comStuart Turner Shower Pump Techflo Tp Standard 1.5 Bar Twin Impeller Wras 49084 5050400490845
Free delivery in 1–3 days
£178.15
Visit shop

Product Information

Full details

This guide is for homeowners seeking to improve water pressure in their gravity-fed shower systems using the Stuart Turner Showermate TP 1.5 bar pump. The Showermate TP boosts both hot and cold water to a single shower, bath, or mixer tap, enhancing your showering experience. Note that this pump is designed for positive head applications only, requiring a minimum water head for proper function.

All features

Model Part NumberTechflow St
BrandStuart Turner

Extended Product Information

FAQs

What is a positive head pump?

A positive head pump requires a 'head' or distance between the pump and the water source, usually a minimum of one meter.

Can I use this pump with a combi boiler?

No, this pump is designed for gravity-fed systems only and is not suitable for combi boilers.

What kind of maintenance does the pump require?

Regularly check for leaks and unusual noises. Clean the pump periodically and inspect connections.

Is the pump easy to install?

Yes, it comes with flexible hoses and is designed for straightforward installation.

What is the warranty period?

The Showermate TP comes with a 1-year manufacturer's warranty.

What is the noise level of the pump?

The typical noise level is 53dB(A).

What are the dimensions of the pump?

Pump dimensions are not available in the provided data.

What type of pipes does this pump connect to?

It uses G 3/4 threaded connections to the pump and 15mm push-fit connections to the pipework.

Troubleshooting

Pump doesn't turn on.

Check the power supply and ensure the pump is correctly wired and that there is a good water supply to the pump.

Low water pressure after installation.

Check all connections for leaks. Ensure the pump is primed correctly and that there are no blockages in the pipes or shower head.

Pump is noisy.

Check for loose components and that the pump is installed on a stable surface. Ensure the anti-vibration couplers are correctly fitted.

Water is leaking.

Check all connections for leaks. Tighten any loose fittings and replace damaged hoses or components.

Pros and Cons

Pros

  • Improves water pressure for a more enjoyable shower experience.
  • Easy to install with the included flexible hoses.
  • Quiet operation, minimizing noise disruption.
  • WRAS approved, assuring product safety and quality.
  • Suitable for a variety of bathroom fixtures.
  • Backed by a manufacturer's warranty for added assurance.

Cons

  • Requires a positive head installation (gravity-fed system).
  • Only suitable for boosting water to a single shower, bath, or mixer tap.
  • Performance is dependent on the existing water supply.
  • May not be suitable for all types of plumbing systems.

Setup, Compatibility & Care

Setup

  1. Preparation: Ensure the power supply is off before beginning installation.
  2. Connection: Connect the pump to the incoming and outgoing water pipes using the supplied 15mm flexible hoses.
  3. Positioning: Place the pump in a location where it is easily accessible for maintenance.
  4. Wiring: Connect the pump to the mains power supply using the pre-wired 1.5m power cable.
  5. Testing: Turn on the water supply and test for leaks. Then, turn on the power to test the pump.

Compatibility

  • System Type: Designed specifically for positive head, gravity-fed systems.
  • Water Temperature: Operates with water temperatures between 4°C and 65°C.
  • Inlet Pressure: Maximum static inlet pressure of 10 meters.

Care

  • Maintenance: Regularly check for any leaks or unusual noises.
  • Cleaning: Clean the pump periodically to remove any debris.
  • Inspections: Schedule professional inspections if any issues arise.

Similar items

Price History

DatePrice
Visit shop