Blackmagic Design Network Transceiver Module - Mini Converter Optical Fiber 12G - 3G BD SFP Optical Module

The maximum data transfer rate for the ADPT-3GBI/OPT module is 3000 Mbit/s, supporting 3G-SDI signals.

No, this module specifically converts a standard electrical 3G-SDI signal to an optical signal. It does not handle analog video conversion.

This module is designed for standard SFP cages. While it fits a standard form factor, it's recommended to use it with compatible Blackmagic Design host devices for guaranteed performance and functionality.

The ADPT-3GBI/OPT supports both Standard Definition (SD) and High Definition (HD) video formats up to 3G-SDI.

No, the optical fiber cable and the optical transceiver module (SFP) are typically sold separately and need to be compatible with the module's cage.

No, this module is rated for up to 3G-SDI, which covers SD and HD formats. It does not support 6G-SDI or 12G-SDI (4K/UHD) signals.

The primary benefit is enabling the transmission of SDI video signals over much longer distances using fiber optic cables compared to traditional coaxial cables, while maintaining signal integrity.

Verify the module is correctly seated in the SFP cage. Ensure both the electrical SDI input and the fiber optic output/input are properly connected. Check that the connected host device and the remote fiber receiver are powered on and configured correctly. Confirm that the fiber optic cable is not damaged.

Inspect the fiber optic cable and connectors for damage or contamination. Try using a different fiber optic cable. Ensure the module is not overheating. Check for firmware updates for your host device.

Ensure the host device is powered off before inserting the module. Reseat the module firmly. Verify the host device is compatible with 3G SFP modules and check for any necessary firmware updates for the host.