AEG Washing Machine - 8kg, 1400 Spin - White

Remove the drawer by pressing the release button. Rinse with warm water and a soft brush. Ensure all detergent residue is removed before replacing it.

Clean the filter every three months or when the machine shows a filter-related error message. More frequent cleaning may be necessary if you do a lot of washing.

The Hygiene programme is a high-temperature wash cycle designed to remove bacteria and viruses, making it ideal for those with allergies or sensitive skin.

Select your desired program, then press the 'Delay Start' button and set the desired delay time using the controls. The machine will start automatically at the set time.

Refer to the user manual for a list of error codes and their solutions. Common issues can often be resolved by checking water supply or cleaning filters. If the problem persists, contact customer service.

It is not recommended to wash shoes in the washing machine unless they are specifically designed to be machine washable. The washing process can damage both the shoes and the machine.

Use detergents specifically designed for washing machines. Avoid using excessive amounts of detergent, as this can lead to residue buildup and poor washing results. Consider using a liquid detergent.

Check if the machine is properly plugged into the power outlet. Ensure the power switch is turned on, and that there's power in the outlet by testing with another device.

Check the drain hose for any kinks or blockages. Also, clean the filter located at the bottom front of the machine.

Make sure the machine is placed on a level surface and that the load is balanced. Adjust the feet if necessary. Avoid overloading the machine.

Check that you're using the correct amount of detergent. Also, inspect the water supply and ensure it has enough pressure. Clean the detergent dispenser.

Ensure that the machine is level. Check for any objects (coins, buttons, etc.) that might have fallen into the drum. Contact customer service if the noise persists.

Wait a few minutes after the cycle has finished as there's a safety feature. Check if the child lock is enabled.