Best current price£69.72from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£69.72Visit shop Storm White Polyx Rafter Bar Intermediate Bar Self Supported - 3Mtr
Visit shop2 offers from £69.72
View price history by clicking the chart icon.
The PolyX Rafter Bar (Intermediate) is designed for professional builders and DIY enthusiasts constructing self-supported roofing systems for conservatories, lean-tos, or pergolas. Its primary benefit is the ability to securely join polycarbonate sheets over long spans while maintaining a weather-tight seal, though users should note that this specific intermediate bar requires a pre-existing wall plate and eaves beam configuration to function correctly.
| Model Part Number | ECO30-W |
|---|---|
| Brand | Storm |
Yes, this is a complete two-part system including the base profile and the snap-down cap.
No, this specific rafter bar is designed for sheets between 16mm and 35mm thick.
Yes, each bar includes one end cap to ensure a clean, professional finish.
The integrated neoprene gasket is designed to provide a weather-tight seal without the need for additional silicone, though local codes may vary.
Yes, the bar can be cut to your desired length using a standard fine-tooth hacksaw or power saw with a non-ferrous blade.
This rafter bar is capable of supporting spans up to 6 metres, depending on the load requirements of your project.
Check that the polycarbonate sheet is fully seated in the gasket and not protruding past the locking groove.
Ensure the cap is fully engaged along the entire length of the bar and verify that the gasket is not pinched or folded during installation.
Check that your bar spacing adheres to the span charts for the specific polycarbonate thickness used.
Before installing, ensure your supporting framework is level. When measuring, account for the thermal expansion of polycarbonate by leaving a small gap at the edges of the sheet. Place the base profile onto the rafter, secure it, and apply the polycarbonate sheet. Once seated, align the snap-down cap and apply even pressure along the length of the bar until it clicks firmly into the base. To clean, use mild soap and water with a non-abrasive cloth; avoid solvent-based cleaners that could damage the finish or the integrity of the neoprene gasket.
PolyX Rafter Bar Intermediate Bar - White - 2mtrFrom £47
NEFF N30 Canopy Cooker Hood - Silver DFrom £119
Riello UPS Vision VST 2000From £479
Smeg KSET86LX3 Telescopic Cooker Hood - SilverFrom £349
Korda Utility Box - KBOX23From £12
STM Dux Plus Folio Case for 11" iPad Pro - BlackFrom £40
Nikon Lens Hood - HB-116From £70
Kitchen cabinet - VCM - WhiteFrom £72
KuKoo Single Stainless Steel Sink - Satin FinishFrom £90
Small Pocket Scales - Orsina - 1305361From £29
Whirlpool Commercial Microwave - PRO 25 IXFrom £239
RJ11 - BT Adapter Kit - kenable - 10777From £4