ATEK Automatic Wire Stripper - Yellow - 0.5-6mm

The ATEK Automatic Wire Stripper is designed to work with wires ranging from 0.5mm² to 6mm², which corresponds approximately to AWG 22 to 10.

Yes, it is suitable for both solid and stranded copper and aluminum wires within its specified gauge range.

No, this is a manual tool and does not require any batteries or external power source to operate.

After use, wipe the blades and body with a dry cloth. Periodically lubricate the pivot points with a light oil. Store in a dry place.

The tool provides a high-leverage crimping function suitable for many common electrical connectors. For highly specialized or critical connections, dedicated crimping tools may offer more specific features.

The hardened steel blades are designed for clean cutting of copper and aluminum wires.

While durable, it is recommended to store the tool in a dry environment to prevent rust and maintain optimal performance. Avoid prolonged exposure to moisture or corrosive elements.

Ensure the wire is within the 0.5-6mm² range. Check if the blades are clean and free from debris. If the issue persists, the blades may be dull and require replacement or servicing.

Verify that the correct size wire and connector are being used within the tool's specifications. Ensure the connector is properly seated before crimping. For critical applications, double-check crimp integrity manually.

Ensure the wire is copper or aluminum and within the tool's cutting capacity. Check the blades for obstructions or damage. Keep blades clean for optimal cutting performance.

Clean the tool, especially the pivot points. Apply a small amount of lubricating oil to the moving parts. Check for any debris or damage that might be impeding movement.