Ryobi R18PD3-0 18V ONE+ Combi Drill - Bare Tool

The drill is compatible with all Ryobi 18V ONE+ batteries.

No, the Ryobi R18PD3-0 is a bare tool and does not include a battery or charger. These must be purchased separately.

The drill can be used on wood, metal, masonry, plastic, plasterboard, ceramic, and tiles.

The hammer drill mode adds an impact force, making it easier to drill into hard materials like brick, stone, and concrete.

The drill has a two-speed gearbox. Use the switch on the top of the drill to select between the two speeds.

The drill has a chuck that you can open by rotating the chuck sleeve. Insert the drill bit and tighten the chuck sleeve to secure the bit.

Regularly clean the drill to remove debris. Store the drill in a dry, safe place. Check the drill bits for wear and replace them as needed.

Ensure the battery is properly inserted and charged. Check the battery contacts for any debris. Try a different battery to rule out a battery issue.

Ensure the battery is fully charged. Reduce the drilling speed or use a sharper drill bit. Avoid applying excessive force; let the drill do the work.

Make sure the drill is set to the hammer drill mode. Check that the material being drilled is suitable for hammer action (e.g., brick, concrete).