Ryobi 18V ONE+™ HP Cordless Brushless Impact Wrench - Bare Tool

No, this is a bare tool. A Ryobi 18V ONE+™ battery and charger are required and sold separately.

The tool delivers 1000Nm of fastening torque and 1600Nm of breakaway torque.

Select the Autostop mode, typically indicated by a specific setting or light. The tool will automatically stop once the nut is tightened to a predetermined level, preventing overtightening.

It uses standard ½" square drive sockets.

Yes, its high torque makes it suitable for driving large fasteners in heavy-duty DIY and light heavy-duty construction fittings.

Battery runtime depends on the specific battery capacity (Ah) used and the intensity of the application. The brushless motor helps maximize runtime.

Wipe the tool with a dry cloth after use. Ensure the air vents are kept clear of debris. Do not use water or solvents.

Ensure the battery is fully charged and properly seated in the tool. Check if the battery contacts are clean.

The battery may be low on charge; try a fully charged battery. Check for any obstructions in the drive mechanism or socket. Ensure the correct torque setting is selected.

Verify that the tool is set to the correct mode for impacting. If the issue persists, the internal mechanism may require professional inspection.

Ensure the Autostop mode is activated and that you are using the correct setting for wheel nuts. Clean the sensor area if visibly obstructed.