Johnstone's Trade Professional Gloss Brilliant White - 2.5L

Johnstone's Trade Professional Gloss Brilliant White is suitable for use on wood and metal surfaces, both interior and exterior.

Generally, two coats are recommended for optimal coverage and finish, especially over previously painted or bare surfaces.

Yes, priming is recommended for bare wood and metal surfaces to ensure good adhesion and a uniform finish.

Clean brushes and equipment immediately after use with a suitable solvent, such as white spirit.

Drying times vary. Refer to the product label for specific drying times, usually a few hours to touch dry, and allow for overnight drying before applying a second coat.

Yes, this paint is formulated to resist yellowing over time, helping to maintain its brilliant white appearance.

Yes, but ensure the radiator is cool and clean before painting. Use a heat-resistant primer if necessary.

Store the paint in a cool, dry place, away from direct sunlight and extreme temperatures.

Ensure adequate ventilation and check the temperature and humidity levels. Allow sufficient drying time between coats.

Ensure proper surface preparation. Apply a second coat if necessary, allowing sufficient drying time.

Use a high-quality brush or roller. Apply thin, even coats and avoid over-brushing.

Apply thinner coats of paint. Avoid applying too much paint at once.