Fiamma Drip Stop - 75 cm - Deep Black

Yes, the material can be cut with standard heavy-duty scissors or a utility knife to match your specific vehicle dimensions.

The adhesive is designed to be strong. If removal is necessary, use a heat gun on a low setting to soften the adhesive, then gently peel away and remove any residue with a citrus-based adhesive remover.

This specific model is provided in Deep Black to complement standard caravan trims.

A single 75 cm strip is intended for targeted protection (such as over a window or door). For full-length roof protection, you will need to purchase multiple units.

The flexible material is designed for exterior use, but it is not intended to be painted. Paint may crack due to the flexibility of the strip.

This is usually caused by inadequate surface preparation. Remove the strip, clean the area with alcohol, and apply a fresh piece of double-sided mounting tape if the original adhesive has been compromised.

Ensure the strip is pressed firmly against the vehicle wall. If a gap exists due to a sharp contour, a small bead of exterior-grade silicone sealant can be applied to the top edge.