ForgeFix Masonry Anchor Bolt - Yellow - M10 x 50mm

Refer to the product specifications or packaging for the correct drill bit size.

These bolts are suitable for use with most masonry materials. Always confirm material suitability.

Loosen the bolt using the appropriate tool. If the bolt is stuck, try tapping it gently with a hammer.

It is a surface treatment that provides enhanced corrosion resistance and an aesthetically pleasing finish.

There are 5 bolts per pack for the M10 x 50mm size.

They are ideal for fixing racking, machinery, trunking, pipework, and switch gear.

Use the correct size drill bit, ensure the hole is clean, and tighten the bolt to the recommended torque.

Ensure the hole is the correct diameter and the bolt is properly aligned. Check the masonry material for crumbling.

Check if the hole is deep enough. Make sure the expansion shield is engaging properly. Verify you are using the correct size socket or spanner.

Inspect for damage, and consider replacing the bolts if corrosion is extensive.