Farrow & Ball All White - No.2005

It is suitable for a wide range of surfaces including wood, metal, and concrete. This includes skirting boards, doors, kitchen cabinets, furniture, radiators, and even floors.

Yes, Farrow & Ball All White Flat Eggshell can be used on exterior wood, metal, and concrete surfaces, provided they are properly prepared and primed.

Clean gently with a soft cloth dampened with a mild soap and water solution. Avoid abrasive cleaners or vigorous scrubbing to maintain the finish.

Flat Eggshell has a low sheen, offering a sophisticated, subtle finish that is less reflective than traditional gloss or satin paints.

All White is a pure white without the cooler blue undertones often found in brilliant whites. It is a softer, more sympathetic white.

Priming is recommended for bare wood, metal, or problematic surfaces to ensure optimal adhesion and finish. For previously painted surfaces in good condition, a light sanding may suffice.

While the paint may be dry to the touch within a few hours, it takes several weeks for the finish to fully cure and achieve its maximum durability and washability. Avoid heavy cleaning during this period.

Ensure the paint is thoroughly stirred before and during use. Apply thin, even coats, working in one direction. Consider using a high-quality brush or roller designed for eggshell finishes.

Verify that the surface was properly prepared and primed if necessary. Ensure the surface was clean, dry, and free from contaminants before application. Check that the correct primer for the surface type was used.

Apply additional thin coats rather than one thick coat. Ensure the surface is not overly absorbent; a primer may be needed. Stir the paint thoroughly again.

Ensure the paint has fully cured (this can take several weeks). For fresh marks, try a slightly damp cloth. For stubborn marks, use a very mild soap solution and rinse gently. Avoid harsh chemicals.