Montane Norste Lite Waterproof Jacket - Blue - L

Pertex Shield 2.5L is a waterproof, windproof, and breathable fabric used in lightweight outdoor gear. The '2.5L' refers to its construction: a face fabric, a waterproof membrane, and a protective print on the inside instead of a separate lining, making it lighter and more packable.

Machine wash on a gentle cycle at 30°C with a technical wash or mild liquid detergent, no fabric softener. Rinse twice. Tumble dry on low heat with towels to reactivate the DWR. Avoid harsh detergents and high heat.

The jacket provides excellent protection against wind and rain, but it is not insulated. For very cold weather, it should be worn as an outer shell layered over warm base layers and insulating mid-layers.

It means the jacket can be compressed and folded into a very small size, making it easy to carry in a backpack or pocket without taking up much space or adding significant weight. This jacket weighs approximately 300g.

The Pivot 2 hood system typically features an aperture adjustment (often a drawcord around the face opening) to cinch it closer, and a crown adjustment (usually a Velcro tab or cord on the back of the head) to fine-tune the fit and prevent it from obstructing your vision.

DWR stands for Durable Water Repellent. It's a coating applied to the outer fabric that causes water to bead up and roll off. This keeps the outer fabric from getting saturated, maintaining the jacket's breathability and preventing a 'wet out' condition.

Yes, while designed for performance outdoor activities, its clean design and lightweight nature make it suitable for casual wear in wet or windy conditions.

Ensure the DWR treatment is active. If not, clean the jacket and re-apply a DWR treatment. Check that all seams are properly taped and that there are no physical damages to the fabric.

Gently clean the zipper teeth with a soft brush and mild soap, then rinse. Ensure no fabric is caught in the zipper. Lubricate with a graphite pencil tip or a specialized zipper wax.

Clean the jacket thoroughly with a technical wash to remove body oils and dirt that can block pores. Ensure the inner membrane is not damaged.

Check that the toggles are clean and functioning correctly. Ensure no debris is obstructing their movement. If they become loose, they can sometimes be tightened by specific methods depending on the toggle type (refer to Montane website for specific hardware guidance).