Volden Concrete Seal & Floor Levelling - White

This primer is suitable for use on both absorbent (e.g., concrete) and non-absorbent (e.g., painted) surfaces.

Sanding may be necessary to remove existing coatings or to roughen very smooth surfaces to improve adhesion, but it depends on the existing surface. Clean and degrease before applying.

Allow the primer to dry completely. Drying times vary, so check the product instructions and environmental conditions.

This primer is compatible with most cement-based levelling compounds. Always check the levelling compound manufacturer's recommendations.

Clean tools and equipment immediately after use with water.

Yes, it is a water-based and solvent-free primer.

Check the product label for the expiration date.

Ensure the surface was properly prepared (clean, dry, and free of contaminants) before applying the primer. Allow the primer to dry completely before applying the levelling compound.

Ensure you are using the correct application method (brush, roller, or spray) and apply a thin, even coat. Avoid over-application.

Ensure adequate ventilation and check the environmental conditions (temperature and humidity) as they can affect drying times.