V33 High Performance Decking Stain - Light Oak Satin - 5L

Coverage will vary depending on the wood type and the application method. Refer to the product label for specific coverage details.

Drying times will vary depending on the environmental conditions. Check the product label for specific drying times. Generally, it dries to touch in a few hours but may require longer for full cure.

It is generally recommended to remove any existing finish before applying V33 High Performance Decking Stain to ensure proper adhesion.

Clean brushes and rollers with the appropriate solvent as specified on the product label immediately after use.

Regular cleaning with mild soap and water is recommended. Avoid abrasive cleaners and pressure washing.

V33 High Performance Decking Stain is suitable for most types of wooden decking. Always test in a small, inconspicuous area first.

Ensure the surface is properly prepared (clean, sanded, and dry) before application. Apply a thin, even coat.

Stir the stain thoroughly before and during application. Apply an even coat across the entire surface.

This could be due to applying the stain over a poorly prepared surface or applying too thick of a coat. Remove the old finish and start again with a properly prepared surface and thinner coats.