Setup, Compatibility & Care
Compatibility: This filter is specifically designed for Leitz TruSens Z-3000 and Leitz TruSens Z-3500 air purifiers.
Setup:
- Ensure your air purifier is unplugged and turned off.
- Open the air purifier to access the filter compartment, usually by removing the back cover.
- Carefully remove the old filter drum.
- Unwrap the new Leitz Pet 3-in-1 HEPA filter drum and insert it into the designated compartment, ensuring it is seated correctly.
- Replace the air purifier cover.
- Plug in and turn on the air purifier.
- Reset the filter replacement indicator if prompted by your air purifier model.
Care:
- The washable prefilter should be hand-washed with cold water as needed, typically when it appears visibly dirty or when replacing the main filter. Allow it to air dry completely before reinserting.
- The HEPA filter and carbon pellet filter are not washable and must be replaced according to the recommended schedule or when the indicator light turns red.