GoodHome Wood Primer & Undercoat - Grey

This primer is specifically designed for use on bare wood surfaces, both interior and exterior.

Drying times vary depending on the conditions. Refer to the product label for specific drying times. Generally, allow at least 4-6 hours before applying a topcoat.

No, this primer is designed for wood. For metal surfaces, you'll need a primer specifically designed for metal.

Coverage depends on the surface and application method. One litre typically covers 10-12 square meters. Check the product label for specific coverage details.

Store in a cool, dry place away from direct sunlight and heat. Ensure the container is tightly sealed to prevent drying out.

This primer is compatible with most water-based and oil-based topcoats. However, always test a small, inconspicuous area for compatibility before applying the topcoat to the entire surface.

Ensure the surface was properly prepared by sanding and cleaning. Apply a second coat if necessary.

Check the room temperature and humidity. Ensure adequate ventilation. Do not apply in very humid conditions.

Ensure the primer was fully dry before applying the topcoat. Make sure the primer and topcoat are compatible.