Wavin OsmaWeld tee 87.5° 40mm white

Name: Wavin OsmaWeld tee 87.5° 40mm white
Brand: Osma
SKU: mjclxt4qeb
Availability: InStock

ABS Solvent weld waste system available in Black, White and Grey. Certified to BS EN 1455-1 Wavin ...

Best current price£2.78from Travis Perkins

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

Travis Perkins£2.78Visit shop

Wavin OsmaWeld tee 87.5 degree 40mm white

Visit shop

TrustedAmazon

Amazon£8.96Visit shop

Osma 5Z190W 40mm (1.5") tee 87.5 degree White

Visit shop

All Offers

2 offers from £2.78 - £8.96

View price history by clicking the chart icon.

Travis PerkinsWavin OsmaWeld tee 87.5 degree 40mm white

£30.00 delivery

£2.78

Visit shop

AmazonOsma 5Z190W 40mm (1.5") tee 87.5 degree White

Free delivery in 1–3 days

£8.96

Visit shop

Product Information

Full details

This guide is for anyone using the Wavin OsmaWeld 87.5° Tee in a 40mm white configuration, designed for solvent weld waste systems. The key benefit is its secure jointing method, ensuring a leak-proof and durable connection. A key consideration is that it is suitable for intermittent discharges of water up to 90°C. This guide will help you understand the features, setup, and maintenance of this essential plumbing component.

All features

Model Part Number	5Z190W
Brand	Osma

Extended Product Information

FAQs

What is the primary material of the Wavin OsmaWeld tee?

The tee is made of ABS (Acrylonitrile Butadiene Styrene).

What is the maximum temperature of water that this tee can handle?

It can handle intermittent discharges of water up to 90°C.

What sizes are available for this tee?

The tee is available in 32mm, 40mm and 50mm sizes.

Is solvent cement included with the tee?

No, solvent cement is not included and must be purchased separately.

What certifications does this product have?

It is Kitemarked to BS EN 1455-1:2000.

Can I use this tee with other types of pipes?

It is designed to be used with Wavin OsmaWeld ABS pipes and fittings. Always check compatibility.

How do I ensure a secure joint?

Use a solvent weld adhesive and insert the pipe into the tee socket with a slight twisting motion.

Troubleshooting

Joint leaks after installation.

Ensure sufficient solvent cement was applied. Re-cut the pipes, clean, and re-weld the joint.

Difficulty in inserting the pipe into the tee.

Ensure the pipe is properly sized and free of any burrs. If necessary, slightly chamfer the pipe end.

Solvent weld joint fails to seal.

Check if you have used the correct solvent cement for ABS. Ensure the surfaces were clean and dry before applying the solvent cement.

Pros and Cons

Pros

Secure and reliable joints
Durable ABS material
Wide range of fitting options
High-temperature resistance
Multiple color choices for aesthetic integration
Certified to BS EN 1455-1:2000

Cons

Requires solvent weld adhesive (not included)
Specific to solvent weld waste systems
Installation requires proper technique for secure joints
Limited to intermittent water discharges up to 90°C
Requires careful measurement and cutting during installation

Setup, Compatibility & Care

Preparation: Ensure the pipes are clean, dry, and free from debris. Measure and cut the pipes accurately to fit the tee.
Application of Solvent Cement: Apply solvent cement evenly to both the inside of the tee sockets and the outside of the pipe ends. Use a solvent cement suitable for ABS pipes.
Assembly: Immediately insert the pipe into the tee socket with a slight twisting motion to ensure even distribution of the cement. Hold the joint together for a few seconds to allow the cement to set.
Curing Time: Allow sufficient time for the joint to cure according to the solvent cement manufacturer's instructions, typically 15-30 minutes for initial setting and up to 24 hours for full cure.
Compatibility: This tee is compatible with Wavin OsmaWeld pipes and fittings made of ABS. Always check the compatibility of the solvent cement with the materials.
Care: Avoid exposure to direct sunlight. Regularly inspect joints for leaks.