Bedec Aqua Advanced Satin - Black 5L

Best current price£27.36from Amazon
Best offers
Shopping.co.uk recommended and popular offers
Amazon£27.36Visit shop Bedec Aqua Advanced GLOSS-Black-1 Litre
Visit shop
Best current price£27.36from Amazon
Shopping.co.uk recommended and popular offers
Amazon£27.36Visit shop Bedec Aqua Advanced GLOSS-Black-1 Litre
Visit shop15 offers from £27.36 - £89.19
View price history by clicking the chart icon.
The Bedec Aqua Advanced Satin in Black is designed for DIY enthusiasts and professionals seeking a durable, quick-drying, and low-odor satin finish for both interior and exterior projects. Its key benefit is providing a smooth, high-build enamel finish with excellent colour retention. A potential caveat is ensuring proper surface preparation for optimal adhesion.
| Colour | Black |
|---|---|
| Model Part Number | BEDE2QB0003/46 |
| Brand | Bedec |
It can be used on most interior and exterior surfaces including wood, metal, plaster, and previously painted surfaces, provided they are properly prepared and primed where necessary.
The paint is touch dry in approximately 30-60 minutes and can be recoated after 2-4 hours, depending on environmental conditions.
Yes, you can add a small amount of water (up to 10%) to thin the paint for easier application, particularly in dry conditions or for achieving a smoother finish. Stir well after adding water.
Clean brushes, rollers, and any other equipment immediately after use with warm soapy water. Dried paint may require a solvent for removal.
While it's a durable satin finish, it is not specifically formulated as a heat-resistant radiator paint. For best results on radiators, a dedicated radiator enamel is recommended.
The coverage is approximately 13-15 square metres per litre per coat, but this can vary depending on the texture and porosity of the surface being painted.
No, a key feature of this paint is its non-yellowing formula, which helps maintain the intended colour over time.
Stir the paint thoroughly. If still too thick, you may add a small amount of water (no more than 10%) for application, especially in dry conditions. Ensure the temperature is within the recommended application range.
Apply paint with even, light strokes. Avoid overworking the paint. Ensure the surface is smooth and properly prepared. Consider using a higher quality brush or roller designed for water-based paints. Apply a second coat for a more uniform appearance.
The surface may not have been properly prepared or primed. Ensure the surface is clean, dry, and free from contaminants. Use an appropriate primer for the substrate, especially for bare wood, metal, or glossy surfaces. Allow adequate drying time for primer and between coats.
Colour can sometimes appear slightly different when wet versus dry. Ensure you have applied the recommended number of coats. Light conditions can also affect perceived colour. Test in a small area if a perfect match is critical.
Setup:
Compatibility:
Care: