Best current price£64.90from AWD-IT.co.uk
Shopping.co.uk recommended and popular offers
AWD-IT.co.uk£64.90Visit shop Arctic White Liquid Freezer Iii Argb 280Mm Aio Liquid Cpu Cooler - Acfre00151a
Visit shop16 offers from £64.90 - £98.99
View price history by clicking the chart icon.
The Arctic Liquid Freezer III 240 A-RGB is an all-in-one liquid CPU cooler designed for PC enthusiasts seeking high-performance cooling with customizable aesthetics. Its key benefit is delivering exceptional thermal management for demanding processors, ensuring stable performance even under heavy loads, with a minor caveat regarding potential compatibility issues with very large M.2 SSD coolers on certain motherboards. Key features include a multi-compatible socket design, A-RGB illumination, efficient VRM cooling, and a low-maintenance, pre-filled system.
| Colour | White |
|---|---|
| Model Part Number | ACFRE00150A |
| Brand | ARCTIC |
The fans operate between 200 RPM and a maximum of 2000 RPM, with PWM support for speed control.
Yes, the Liquid Freezer III 240 A-RGB typically comes with MX-6 thermal compound either pre-applied to the cold plate or included separately in the package.
Arctic generally offers a 6-year manufacturer's warranty on their Liquid Freezer series products.
Yes, the A-RGB lighting is digitally addressable and can be controlled via compatible motherboard software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) using the standard 3-pin A-RGB connector.
The 60mm VRM fan on the pump housing actively cools the motherboard's voltage regulator modules (VRMs), which is especially beneficial for high-power CPUs and systems with poor case airflow.
The cooler can be connected either through a provided splitter cable for separate control of pump, VRM fan, and radiator fans, or via a single connection for all-in-one control, similar to previous models.
The radiator measures 27.7 cm in width, 12 cm in height, and 3.8 cm in depth.
Yes, the Liquid Freezer III is designed to be future-proof and includes mounting hardware for the Intel LGA1851 socket.
Ensure all fan and RGB connectors are securely plugged into the motherboard or controller. Verify that the fan header is enabled in the BIOS and set to the correct control mode (PWM). Check if the RGB lighting is controlled via motherboard software and ensure it is configured correctly.
Confirm the pump's 4-pin connector is properly seated on the motherboard's CPU_FAN or AIO_PUMP header. Check the pump speed in your BIOS or monitoring software; it should be within the specified RPM range (800-2800 RPM). If noise persists, contact support as the pump may be faulty.
Verify that the cooler is mounted correctly with even pressure. Ensure the protective plastic film has been removed from the cold plate. Check that the thermal paste application is adequate and that the radiator fans and pump are spinning at sufficient speeds. Clean dust from the radiator and fans.
If the radiator interferes with a large M.2 cooler, contact Arctic support for their complimentary M.2 cooler solution, which allows for revised mounting.
Setup: The Liquid Freezer III is designed for a straightforward installation. It comes with pre-installed radiator fans in a push configuration and features integrated fan cables, minimizing cable management. The mounting system supports both Intel LGA1851/LGA1700 and AMD AM5/AM4 sockets, with specific brackets and standoffs provided. Ensure you have adequate space in your PC case for the 240mm radiator and fans (typically 120mm fan mounts on the top or front of the case). Use the included thermal compound for optimal heat transfer.
Compatibility: While designed for broad compatibility, some motherboards with oversized M.2 SSD coolers in the primary M.2 slot might obstruct the radiator placement. Arctic offers a free M.2 cooler solution for affected users. Always check your motherboard's specifications and case clearance before purchase.
Care: As an all-in-one liquid cooler, the Liquid Freezer III requires minimal maintenance. Keep the radiator and fan blades free of dust using compressed air or a soft brush. Avoid using abrasive cleaners or submerging any part of the cooler in water. The fluid loop is sealed and does not require refilling.
