Rocket TT Treadmill Lube 400ml

For optimal performance and longevity, it is generally recommended to apply treadmill lubricant every 3-6 months, or more frequently if you notice increased noise or resistance. Refer to your equipment's manual for specific recommendations.

This product is specifically formulated for indoor fitness equipment. Its effectiveness and suitability for outdoor elements have not been tested.

Yes, the 100% silicone formula is designed to be safe for most common treadmill belt materials. Always check your treadmill manufacturer's recommendations if unsure.

Low odour means the product has a minimal scent during and after application, making it more pleasant to use in an indoor environment compared to lubricants with strong chemical smells.

The primary application is the underside of the belt. While some lubricants can be used on the deck, this product is optimized for belt-to-deck friction reduction by applying it directly to the belt.

Use short bursts of spray and the included straw for targeted application. Wipe away any excess immediately with a clean cloth. It's better to apply a thin, even layer and reapply if needed than to over-apply.

Ensure the lubricant was applied directly to the belt underside and not just the deck. Reapply if necessary, ensuring even coverage. Check for other mechanical issues unrelated to belt friction.

Confirm the belt is properly tensioned according to the manufacturer's guidelines. The lubricant may need time to fully permeate the belt; run the equipment at a low speed for a few minutes. Ensure no excess lubricant is causing slippage.

Ensure the yellow cap is in the 'ON' position. If it persists, carefully try to clear the nozzle with a fine pin while the can is in a safe, upright position. Ensure the cap was in the 'OFF' position during storage.

This can happen if too much product is used or if application is not precise. Ensure excess is wiped off immediately after application. Protect the floor with a drop cloth during application if concerned.