Ultratape Thread Seal Tape - 12mm x 12m

The amount of tape depends on the size of the fitting. Generally, 3-5 wraps are sufficient, but adjust as needed to achieve a good seal.

No, Ultratape is designed for single-use. Once the fitting is disassembled, the tape should be replaced.

Ultratape is not specifically rated for use with natural gas. Always check local codes and regulations.

When stored properly, Ultratape has a long shelf life. Refer to the packaging for specific expiry information.

Ultratape is compatible with a wide range of materials. However, always ensure compatibility with the specific fluids and pressures involved.

The tape usually breaks easily or can be peeled off. Remove any remaining residue with a clean cloth.

Consult the manufacturer's specifications for the precise temperature range. The product is suitable for a wide range of temperatures used in domestic and industrial applications.

Unscrew the fitting, remove the old tape, and reapply Ultratape, ensuring proper wrapping technique. Tighten the fitting firmly.

Ensure the tape is wrapped in the correct direction. Avoid over-wrapping the threads. Use a wrench to provide adequate torque, but avoid excessive force.

Handle the tape gently. Ensure the threads are smooth and free from burrs. If necessary, use a new section of tape.