Best current price£3.79from B&Q
Shopping.co.uk recommended and popular offers
B&Q£3.79Visit shop B&Q - Ptfe Tape Plumbers Tape To Stop LeaksTeflon Tape12mm X 12M Plumbing White Sealant Tape Leak-Free 1 Roll
Visit shop1 offer from £3.79
View price history by clicking the chart icon.
The Dapetz PTFE Threaded Sealing Plumbers Tape is designed for professional plumbers and DIY enthusiasts who require a reliable, watertight seal for a wide variety of threaded fittings. Its primary benefit lies in its versatility, effectively sealing materials ranging from plastic and brass to steel and cast iron, while simultaneously acting as a lubricant to ease assembly. One caveat to note is that this thin-film tape requires careful application to ensure consistent thickness across threads for an optimal seal in high-pressure systems.
| Model Part Number | DP10577 |
|---|---|
| Brand | Dapetz |
This tape is designed for standard plumbing tasks. Check local codes and consult a professional before using it for gas connections, as specific high-density yellow tapes are often required for gas.
Generally, 3 to 5 wraps are sufficient for most fittings, but it may vary depending on the thread size and condition.
No, PTFE tape is non-adhesive and relies on the material's physical properties to conform to the threads.
Yes, PTFE (polytetrafluoroethylene) is chemically inert and safe for use with potable water systems.
No, it is recommended to remove the old tape and apply a fresh layer every time a fitting is disassembled.
Check if enough layers of tape were used and ensure the tape was wound in the direction of the thread tightening.
Apply the tape with consistent tension and avoid over-stretching it during the wrapping process.
Ensure the tape is not overlapping the very first thread at the end of the pipe, which can cause cross-threading.
To use the tape, ensure the threads are clean, dry, and free of any debris or old sealant residue. Wrap the tape around the male threads, overlapping each layer by about half the width of the tape. Typically, 3 to 5 wraps are sufficient for most connections, though larger threads may require more. Once applied, smooth the tape into the threads with your fingers to ensure it is seated firmly. Store the tape in a cool, dry place inside its protective casing to prevent dust or grit from adhering to the adhesive surface, which could compromise the seal.
