Wavin OsmaSoil Pipe - 110mm - 3M - Grey

Recycore® Technology is Wavin's process for using a high percentage of recycled material in their products while maintaining the same high performance standards as virgin material.

Yes, the Wavin OsmaSoil system is designed for soil, waste, and ventilation, making it suitable for all sanitary waste removal.

Push-fit joints use a rubber ring seal for a watertight connection and are generally quicker to install. Solvent weld joints require a primer and cement to create a permanent, fused bond and are often used for more demanding applications or where a permanent seal is critical.

The pipe can be cut using a fine-toothed handsaw or a pipe cutter. Ensure the cut is square and smooth the edges before making a connection.

PVC-U pipes are known for their durability and are designed for a long service life, typically many decades, when installed and maintained correctly.

The Wavin OsmaSoil system is designed for above-ground soil, waste, and ventilation. For underground drainage, Wavin offers specific underground drainage systems.

Detailed instructions for solvent welding, including safety precautions, are typically provided by the solvent cement manufacturer and can also be found in Wavin's technical documentation for the OsmaSoil range.

For push-fit joints, ensure the pipe is fully inserted and the ring seal is correctly seated. Re-lubricate and re-insert if necessary. For solvent weld joints, the joint may not have been properly bonded; it may need to be cut out and re-made.

Use a drain snake or appropriate drain cleaning chemicals suitable for PVC. Ensure no foreign objects have entered the system.

This is uncommon with PVC-U. Ensure the system is not exposed to excessive UV light or extreme temperatures beyond its operating range. Check for chemical contamination.

Ensure correct lubrication is applied. Check for any obstructions or damage inside the socket or on the spigot end.