Extended Product Information
FAQs
How do I activate the 8-hour timer function?
To activate the timer, simply plug in the lights, turn them on, and select your desired lighting function. The timer will automatically begin its 8 hours on / 16 hours off cycle from that moment. The lights will then turn on at the same time each day.
Can I adjust the timer duration (e.g., to 4 hours on)?
No, the timer function is fixed at an 8 hours on, 16 hours off cycle. It cannot be manually adjusted to different durations.
Are these lights suitable for a large outdoor Christmas tree?
Yes, with 720 Supabright LEDs and an indoor/outdoor rating, they are suitable for outdoor trees. The 10m lead wire helps with positioning, but consider the total illuminated length to ensure adequate coverage for your specific tree size.
What happens if I unplug the lights after setting the timer?
If you unplug the lights, the timer will reset. When you plug them back in, you will need to re-activate the timer by turning them on at your desired start time.
How do I switch between the 8 different lighting functions?
There is a control button located on the plug or a small control unit attached to the lead wire. Press this button repeatedly to cycle through all 8 available lighting modes until you find the one you prefer.
Can I connect multiple sets of these lights together?
The product description does not mention the ability to connect multiple sets together (daisy-chaining). It is generally not recommended to connect light sets unless explicitly stated by the manufacturer to avoid overloading.
Is the green cable noticeable in daylight?
The green cable is designed to blend discreetly with natural foliage, such as Christmas tree branches or garden bushes, making it less noticeable during daylight hours.
Troubleshooting
Lights are not turning on.
- Ensure the power plug is securely inserted into a working electrical outlet. 2. Check if the outlet itself is receiving power (e.g., by plugging in another device). 3. Inspect the cable for any visible damage or cuts.
The timer function isn't working correctly.
- The timer activates from the moment you turn the lights on and select a function. If you unplug the lights, the timer resets. Ensure you've plugged them in and selected a mode at your desired 'on' time. 2. The timer is fixed at 8 hours on/16 hours off. It cannot be adjusted.
Only some LEDs are lit or working intermittently.
- Gently check the connections along the light string for any loose points, although LEDs are generally designed to operate independently. 2. If a small section is out, it might be due to localized damage; however, the majority of the string should remain operational due to LED design.
Cannot change between the 8 flashing functions.
- Ensure the control button (usually on the plug unit) is being pressed firmly and consistently. 2. Try unplugging the lights for a few minutes, then plug them back in and attempt to change the function again.
Pros and Cons
Pros
- Automated timer offers daily convenience and energy savings.
- Eight distinct lighting functions, including static, cater to various moods.
- Suitable for both indoor and outdoor use, enhancing versatility.
- Long 10m lead wire provides flexible placement options.
- 720 bright LEDs deliver powerful and comprehensive illumination.
- Green cable blends discreetly into natural settings.
Cons
- Timer duration is fixed at 8 hours on / 16 hours off and cannot be adjusted.
- Product information does not specify the total lit length, requiring estimation for coverage.
- Requires a standard power outlet, limiting placement where outlets are unavailable.
Setup, Compatibility & Care### Setup1. Unpack: Carefully remove the lights from their packaging, unraveling the string completely to avoid tangles.2. Position: Decide on your desired location. For outdoor use, ensure the plug is connected to a weather-protected outdoor socket or via a suitable outdoor-rated extension lead.3. Plug In: Connect the power plug to a mains power outlet.4. Select Function: Press the button on the control unit (usually located near the plug) repeatedly to cycle through the 8 different lighting functions until you find your preferred mode.5. Activate Timer: Once the lights are on and displaying your chosen function, the 8-hour timer automatically begins. The lights will then turn off after 8 hours and switch back on at the same time the following day. If you unplug the lights, the timer will reset, and you'll need to repeat this step to set it again.### CompatibilityThese lights are compatible with standard mains power outlets (e.g., 220-240V in many regions). They are suitable for use both indoors and outdoors, but ensure any outdoor power connections are waterproof and protected from the elements.### Care & Maintenance1. Cleaning: Before storage, gently wipe the lights and cable with a dry, soft cloth to remove any dust or debris. Do not use harsh chemicals or immerse the lights in water.2. Storage: When not in use, carefully coil the light string to prevent tangling and damage. Store in a cool, dry place, away from direct sunlight and extreme temperatures, preferably in their original packaging or a sealed container.3. Inspection: Before each use, visually inspect the entire light string, including the cable and LEDs, for any signs of damage, cuts, or frayed wires. Do not use if any damage is found.
Cheaper-Online.co.uk£13.25Visit shop 
B&Q£14.14Visit shop 
