Crown Matt Emulsion Paint - Beige White

Typically, the paint is touch dry in 1-2 hours and can be recoated after 4 hours. However, drying times can vary depending on room temperature, humidity, and ventilation.

A 5L can of Crown Matt Emulsion Paint typically covers approximately 65 square meters per coat, depending on the porosity and texture of the surface. We recommend two coats for the best finish.

No, this product is specifically formulated for interior walls and ceilings. For woodwork or metal, you would need a different type of paint designed for those surfaces, often requiring a specific primer.

While it can be gently wiped with a soft, damp cloth and mild detergent for minor marks, it's not designed for heavy scrubbing. Aggressive cleaning can lead to burnishing (a shiny patch) on the matt finish.

A primer is highly recommended for new, bare, or porous surfaces (like fresh plaster), or when making a significant colour change. It helps with adhesion, provides a uniform base, and improves the final finish and coverage. For previously painted surfaces in good condition, a primer may not be necessary.

For best results with water-based emulsion paints, use a good quality synthetic bristle brush for cutting in and a medium-pile synthetic roller for larger wall and ceiling areas. This combination will help achieve a smooth, even finish.

Ensure the surface was thoroughly prepared (clean, dry, smooth). Apply paint evenly using a high-quality roller or brush, avoiding overspreading. Allow sufficient drying time between coats and apply consistent pressure.

Verify that the surface was properly primed, especially if it was porous or a significant color change. Ensure you are applying full, even coats and allowing each coat to dry completely before applying the next. Very dark or very light base colors might require an extra coat.

This typically indicates poor surface preparation. Ensure all loose, flaky paint was removed, and the surface was clean, dry, and sound before painting. Proper priming for unpainted or challenging surfaces is crucial for adhesion.

Use a good quality roller with the appropriate nap for your surface. Avoid applying too much pressure. For brushing, use a high-quality synthetic brush and try to maintain a 'wet edge' to prevent lap marks. Applying thinner, even coats often helps.