Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is dry and free from anything that could interfere with adhesion. Sand the surface with a suitable grade of abrasive paper, and remove all dust.
- Timber Preparation: If the wood has oils/extractives, swab with clean methylated spirits.
- Knotting: Treat knots with two thin coats of fresh knotting.
- Filling: Fill any fixing holes, open joints, and shallow surface defects with Sandtex Trade Mixed Filler and sand.
- Priming: Prime with one coat of Sandtex Trade Flexible Primer Undercoat.
- Application: Apply two coats of Sandtex Trade Exterior Eggshell X-Tra White using a brush or roller.
- Drying: Allow 4-6 hours to touch dry, and 16 hours before recoating. For optimal results, ensure the paint is fully dry before exposing it to weather.
*Compatibility*: This paint is compatible with exterior wood and suitably primed metal surfaces. Use Sandtex Trade Flexible Primer Undercoat for best results.