Farecla G3 Extra Plus Abrasive Cutting Compound - 250g

While it is designed for machine use, it can be used by hand for very small touch-ups, though the results will be less uniform.

Yes, G3 Extra Plus is safe for modern automotive clear coats when used with correct technique and appropriate pads.

Yes, a final wash or an isopropyl alcohol wipe is recommended to remove remaining residues before applying wax or sealant.

A wool buffing pad is generally recommended for the initial cutting stage to achieve maximum abrasive efficiency.

Farecla formulas are generally designed to be body-shop safe, but always verify the specific technical data sheet if working in a specialized paint environment.

Use caution on plastic parts as they heat up much faster than metal; keep the polisher moving and use lower speeds.

Reduce the amount of product used or add a small mist of water to the pad to reactivate the lubrication.

Apply more pressure or switch to a more aggressive wool cutting pad, ensuring the pad is not saturated with old residue.

This is likely 'micro-marring'. Follow up with a finer finishing compound and a soft foam pad to refine the surface clarity.