Dulux Weathershield - Hazelnut Truffle Satinwood

No, this product is specifically formulated for exterior use on wood, metal, and uPVC surfaces and is not recommended for interior applications.

This paint guarantees up to 6 years of weather protection, provided it is applied correctly to a properly prepared surface.

You can use this paint on exterior wood, metal, and uPVC surfaces, such as doors, window frames, garden furniture, gates, and downpipes.

Since it's a water-based paint, you can easily clean your brushes and rollers with warm water immediately after use.

This is a 'Quick Dry' formula. While exact times can vary based on conditions, water-based paints typically are touch dry in 1-2 hours and ready for recoating in 4-6 hours. Always refer to the product label for specific drying and recoat times.

For optimal adhesion and durability, especially on bare wood, metal, or uPVC, a suitable exterior primer may be required. Always check the product label or technical data sheet for specific priming recommendations.

Yes, Dulux Weathershield Hazelnut Truffle Satinwood is formulated to be mould resistant, helping to keep your exterior surfaces looking clean and well-maintained.

Ensure the surface was thoroughly cleaned, dried, and prepared (sanded, primed if necessary) before application. Loose or flaking old paint must be removed completely.

Thoroughly stir the paint before and during application. Apply evenly in thin coats, avoiding overworking the paint. Ensure brushes or rollers are suitable for water-based satin paints.

If mould reappears, the original surface may not have been properly treated with a fungicidal wash before painting. Ensure all mould is removed and treated at the root level before repainting.

Environmental conditions greatly affect drying. Avoid painting in direct hot sunlight or in very cold/humid conditions. Aim for moderate temperatures and good ventilation.

Always check the paint color in natural light before starting your project. The final appearance can be influenced by the surface type, number of coats, and lighting conditions.