Brown Draft Excluder Kit - B&Q

You can clean the draft excluder by gently wiping it with a damp cloth. Avoid using strong detergents or abrasive materials that could damage the surface or its adhesive.

The kit includes one draft excluder strip measuring (L)1000mm (1 meter) in length and (W)50mm in width.

Yes, the excluder can be cut to the desired length using scissors or a utility knife to ensure a perfect fit for your door.

It is suitable for most standard interior and exterior doors, provided the bottom edge is relatively smooth and the gap beneath is consistent.

This excluder effectively stops drafts coming from under the door. It may not address drafts originating from other parts of the door frame.

The longevity of the adhesive depends on the surface it's applied to and the frequency of door use. For best results, ensure the surface is clean and dry upon application, and reapply pressure if it seems to loosen.

Ensure the door and floor surfaces are thoroughly cleaned and dried before application. For uneven surfaces, consider a more flexible draft-proofing solution or a primer for better adhesion.

Check if the excluder is properly aligned and pressed firmly against the door. Ensure there are no gaps. The door may also have drafts coming from other areas, such as around the frame.

Measure the width of the door and carefully cut the excluder strip to size using sharp scissors or a utility knife before applying.

Clean the surface again and reapply pressure. If the adhesive has lost its tack, you may need to replace the strip or consider using a suitable double-sided tape designed for heavy-duty applications.