Volden Black Draft Excluder Kit - (L)1000mm (W)42mm

The Volden Draught Excluder features a durable aluminium base and a brush seal.

You can cut the aluminium base to your desired length using a hacksaw or a similar cutting tool. Ensure a clean cut for a neat finish.

The primary benefit is to prevent heat loss and stop draughts, thereby improving your home's energy efficiency and comfort.

Yes, it can be used on both doors and windows, provided there is a suitable surface for screw-in installation and a gap to seal.

Screws are not included with the kit. You will need to provide your own screws suitable for the installation surface.

Each kit is 1000mm (1 meter) in length and can be cut down to size.

The width of the brush seal is 42mm.

Ensure the excluder is screwed firmly into place and the brush is making full contact. Adjust positioning or check for obstructions. If the gap is too large, consider a thicker brush seal or a different type of draught excluder.

Ensure you are using screws appropriate for the material of your door or window frame. For softer wood, consider using slightly longer or wider screws, or using wall plugs if fixing into masonry.

Inspect the brush for any physical damage. If shedding is minor, it may be residual from cutting. If significant, the unit may need replacement. Ensure the brush is not being scraped against abrasive surfaces.