SRAM Disc Brake Pads - Organic Compound - Level

Brake pad lifespan varies depending on use and riding conditions. Inspect your pads regularly and replace them when they are worn down to the manufacturer's specified minimum thickness.

You'll typically need a set of Allen keys, a Torx wrench (depending on your brake system), and potentially a pad spreader tool.

These pads are optimized for use with rotors that are in good condition. It is recommended to replace rotors when installing new brake pads.

Bedding in is the process of transferring a layer of brake pad material to the rotor surface. It is achieved by performing several controlled stops from moderate speeds. This improves braking performance.

Organic pads, like these, offer good modulation and are generally quieter. Metallic pads typically offer more stopping power and greater durability, especially in wet or muddy conditions.

Use isopropyl alcohol and a clean rag to remove any dirt or contaminants from the rotor surface. Avoid touching the rotors with your bare hands after cleaning, as skin oils can affect braking performance.

Check for air in the brake lines and bleed the brakes if necessary. Ensure that the pads are properly bedded in. Inspect your rotors for contamination.

Clean the rotors with isopropyl alcohol. Check the pad alignment and make sure they are not contaminated. If the noise persists, replace the pads.

Check for any leaks in the brake system. Make sure the brake levers are properly adjusted. Inspect the pads and rotors for excessive wear.