Bulls Eye 1-2-3 is a high-performance universal water-based primer-sealer/stain killer/bond coat t...Bulls Eye 1-2-3 is a high-performance universal water-based primer-sealer/stain killer/bond coat that combines fast-dry convenience with outstanding adhesion and stain killing power. It is rust inhibitive and ideal for new metal, resisting flash rusting in its “wet” state and providing rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film, perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. It has a quick 30-minute drying time and 1-hour recoat time, and can be tinted towards mid-tone colours to improve the hide and coverage of your topcoat, saving time and money.
Key features and benefits:
* Interior and exterior use
* Adheres to all surfaces without sanding
* Seals stains, graffiti, and tannin bleed
* Mould and mildew resistant film
* Rust inhibitive – great for new metal
* Dries in 30 minutes, recoatable in 1 hour
* Tintable to mid-tone colours
Application information:
* Coverage - 10m² per Litre
* Touch dry 35 minutes
* Hard dry 7 days
* Recoatable 1 hour
* Thinning: Add 10% clean water and stir thoroughly. Note that thinning the primer may affect its stain blocking properties.
Available in 500ml, 1 Litre, 2.5 Litre and 5 Litre.
Zinsser Bulls Eye® 1-2-3 Plus Primer, Sealer & Stain Killer Grey 1 litre ZINBE1Free delivery in 1–3 days£36.72Visit shop →
Zinsser Bulls Eye 1-2-3 Plus Primer, Sealer & Stain Killer Grey 1 litreFree delivery in 1–3 days£41.98Visit shop →
Product Information
Full details
This guide helps users get the most out of Zinsser Bulls Eye 123 Grey Primer, a water-based primer and sealer suitable for both interior and exterior surfaces. It's ideal for those seeking excellent adhesion and quick drying times. Note that while it offers great mold resistance, proper surface preparation is still crucial for optimal results. The primer seals various surfaces, eliminates sanding needs, and prevents rust on ferrous metals.
All features
Colour
Grey
Model Part Number
ZN7041353E1
Brand
Zinsser
Extended Product Information
FAQs
What surfaces can I use this primer on?
Zinsser Bulls Eye 123 Grey Primer can be used on a wide range of surfaces, including wood, drywall, plaster, metal, and previously painted surfaces.
Is sanding necessary?
Sanding is generally not necessary, but lightly sanding glossy surfaces can improve adhesion.
How long does it take to dry?
Drying time is typically around 1 hour to the touch, and can be recoated after 1 hour. Allow for longer drying times in humid conditions.
Can I use this primer outside?
Yes, Zinsser Bulls Eye 123 Grey Primer is suitable for both interior and exterior use.
What is the coverage rate?
Coverage depends on the surface and application method. Generally, expect to get around 10-12 square meters per liter.
What is the best way to apply this primer?
You can apply it with a brush, roller, or sprayer.
How do I clean up after using this primer?
Clean up with warm, soapy water.
Can I use any topcoat with this primer?
Zinsser Bulls Eye 123 Grey Primer is compatible with most topcoat paints. Always check the topcoat manufacturer's recommendations.
Troubleshooting
Primer not adhering properly
Ensure the surface is properly cleaned and prepared. Lightly sand glossy surfaces.
Primer takes too long to dry
Ensure adequate ventilation and avoid applying too thick of a coat.
Mould reappearing after priming
Ensure the surface is completely clean and the source of moisture is addressed before applying the primer.
Topcoat not adhering well to primer
Ensure the primer is fully dry and compatible with the topcoat. Lightly scuff the primed surface if necessary.
Pros and Cons
Pros
Excellent adhesion on various surfaces
Quick drying time
Low-odour formula
Suitable for interior and exterior use
Mould resistant
Prevents rust on ferrous metals
Cons
Requires proper surface preparation for best results
May require multiple coats on heavily stained surfaces
Limited to a 500ml pack size
Grey color might not be suitable for all topcoat colors
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, dirt, and grease. Lightly sand glossy surfaces to improve adhesion.
Application: Apply with a brush, roller, or sprayer. Apply a thin, even coat.
Drying Time: Allow the primer to dry completely before applying the topcoat. Drying times can vary depending on conditions.
Compatibility: Compatible with most topcoat paints. Always check the topcoat manufacturer's recommendations.
Clean Up: Clean brushes and rollers with warm, soapy water.
Storage: Store in a cool, dry place. Keep the container tightly sealed when not in use.